| NO | Number | Name | Qty |
| A1 | YW13E01015D2 | CABLE | 1 |
| A2 | 2486R89D3 | ELECTRIC CABLE | 1 |
| A3 | YW13E00003D1 | ELECTRIC CABLE | 1 |
| A4 | 2486R87D1 | CABLE | 1 |
| A5 | LP13E01001F1 | WIRE HARNFSC | 1 |
| A6 | YW13E01018P1 | WIRE HARNESS | 1 |
| A7 | LE13E01006P1 | HARNESS 100mm Long [3-15/16 in | 1 |
| A8 | ZS18C08016 | SCREW M08x1.25x16mm | 2 |
| A9 | ZW26×08000 | WASHER Lock --ID 08x0D 15xTh 2.0mr |
2 |
| A10 | 2w16H08000 | WASHER ID 08x0D 18xTh3.2mm | 2 |
| A11 | ZN18C08007 | NIT M0Bx1.25m0 | 2 |
| A12 | 24202699 | GROMMET | 1 |
| A13 | 2432R233D1 | C1IP 37x12x4000 | 2 |
| A14 | 2432R233D2 | CLIP 37x12x40mm | 2 |
| A15 | 2432R233D3 | CIIP 50x16x60mm | 1 |
| A16 | FY01P01043D3 | CIP Wne Ties-188mm Lon | 3 |
| A17 | ZM11C08016 | BOLT | 2 |
| A18 | ZM61C06012 | BOLT | 2 |
| YN13E00014F1 | HARNESS | 1 | |
| B1 | YN13E01072P1 | HARNESS | 1 |
| B2 | LP13E01001P1 | Wiring Harness | 1 |
| LP13E01029P1 | Wiring Harness | 1 | |
| LP13E0134P1 | Wiring Harness | 1 | |
| B3 | LE13E01005P1 | CABLE | 1 |
| B4 | ZW26008000 | WASHER | 1 |
| B5 | ZW16008000 | WASHER | 1 |
| B6 | ZN18C08007 | NIT M08x1.25mm | 1 |
| B7 | YN03E01001D5 | CLIP 195mm Long [7-43/64 in]--Black | 5 |
| B8 | YN03M01064P1 | GRDMMET GROMMET | 1 |
| LP16E00001F1 | HARNESS | 1 | |
| B9 | 2432Z290 | CLIP | 1 |
| C1 | YW16E01002P1 | WIRE HARNESS | 1 |
| C3 | NW30P01002P1 | CLIP | 1 |
| 2432Z290 | CLIP | 4 | |
| 24322290 | CLIP | 4 | |
| C4 | ZS18F10014 | SCREWM10x1.25x14mm | 1 |
| C5 | ZS18C10014 | SCREWM10x1.50x14mm | 1 |
| C6 | ZW26×10000 | LOCK WASHER ID 10xOD 18xTh 2.5mm |
1 |
| C7 | ZW16×10000 | WASHER ID 10x0D 21xTh2.0mm | 3 |
| C8 | ZN18C10008 | NUT M10g1.50mm | 1 |
| C9 | FYD1P01043D3 | CLIP Wire Ties --188mm Long | 2 |
Q: What Kobelco models use the LP13E01001P1, LP13E0134P1, and LP13E01029P1 wiring harness set?
A: The COGENG wiring harness set is a direct OEM replacement for Kobelco part numbers LP13E01001P1, LP13E0134P1, and LP13E01029P1, designed for specific Kobelco excavator models where these harness part numbers are specified. These three harnesses typically represent different sections of the machine's complete electrical system. Always verify each part number against your machine's parts manual or original harness tags to confirm exact compatibility before ordering.
Q: What are the symptoms of a failing wiring harness on a Kobelco excavator?
A: Common symptoms include intermittent electrical faults, multiple warning lights illuminated on the monitor, unresponsive hydraulic or engine controls, erratic gauge or sensor readings, CAN bus communication errors, specific functions not responding, or unexpected machine shutdowns. Kobelco excavators depend on reliable electrical connections for control module communication, and harness degradation from heat, vibration, and moisture ingress is a frequent source of electrical problems.
Q: What is the difference between the LP13E01001P1, LP13E0134P1, and LP13E01029P1 harnesses?
A: In a three-harness set, each part number typically represents a different harness section. Common configurations include one serving as the main chassis or cab harness, another as the engine harness, and the third as a sub-harness for specific systems such as the monitor, sensor, or pump control circuits. Each harness handles distinct circuits and connectors, and all three work together to form the machine's complete electrical system.
