PRODUCT IDENTIFICATION
CROSS REFERENCE GUIDE
TECHNICAL SPECIFICATIONS
Electrical Specifications
Pressure Specifications
Mechanical Specifications
Pinout Configuration
Pressure vs. Output (4-20 mA)
Pressure vs. Output (0.5-4.5V)
Environmental Ratings
COMPATIBLE HITACHI EXCAVATORS
EX120-5 Series
EX200 Series
ZAX200 Series
Compatible John Deere Models
HYDRAULIC SYSTEM APPLICATIONS
Frequently Asked Questions
Q: What Hitachi and John Deere models use the 4332040 pressure sensor?
A: The COGENG 4332040 pressure sensor is a direct OEM replacement designed for Hitachi excavator models including EX120-5, EX200-3, EX200-5, and ZAX200 series, as well as equivalent John Deere excavator models where this sensor part number is specified. This sensor is typically used in the hydraulic system for monitoring pump discharge pressure, pilot pressure, or other critical hydraulic circuits. Always verify this part number against your machine's parts manual or the original sensor's identification markings to confirm exact compatibility before ordering.
Q: What are the symptoms of a failing hydraulic pressure sensor on a Hitachi or John Deere excavator?
A: Common symptoms include erratic or incorrect hydraulic pressure readings on the monitor panel, active diagnostic trouble codes related to the pressure sensor circuit, degraded hydraulic performance, the machine entering a failsafe or limp mode, intermittent hydraulic function response, or the engine control system failing to properly match engine speed to hydraulic load demand. A faulty pressure sensor can significantly impact overall machine performance, digging force, and fuel efficiency.
Q: How does the hydraulic pressure sensor affect excavator operation?
A: The 4332040 sensor provides real-time hydraulic pressure data to the machine's electronic control system. This information is used to manage pump displacement, engine speed matching, and implement response. Accurate pressure sensing is essential for smooth hydraulic operation, preventing system overloads, and optimizing fuel consumption.
Q: Is this sensor a direct plug-and-play replacement?
A: Yes, the COGENG 4332040 sensor is manufactured to exact OEM specifications for thread size, electrical connector type, pressure range, output signal characteristics, and response time. It is a direct plug-and-play replacement requiring no wiring modifications or adapters when installed on compatible Hitachi or John Deere excavator models.
Q: What is the warranty coverage for this pressure sensor?
A: COGENG provides a standard 12-month warranty against manufacturing defects from the date of installation. Proof of purchase and installation by a qualified technician are required. Warranty does not cover failure caused by hydraulic fluid contamination, over-pressurization, improper installation, overtightening, thread damage, or use on incompatible equipment.
Q: What should I check before installing the new pressure sensor?
A: Before installation, verify the hydraulic system is depressurized, inspect the sensor mounting port for debris or damage, check the electrical connector for corrosion, and apply the appropriate thread sealant if specified by the service manual. Torque the sensor to manufacturer specifications to prevent thread damage or hydraulic leaks. Contaminated hydraulic fluid can damage the new sensor, so verify fluid cleanliness.
Contact COGENG
📞 Phone: +86-185-2913-1515 🌐 Instagram
📧 Email: hugo@cogeng.net 🌐 Facebook：Excavator Parts Selection and Replacement Community
💬 WhatsApp +86-185-2913-1515 Facebook: Excavator Wiring Harness
💬 WeChat: +86-185-7865-1106 Facebook: Excavator Wire Harness
🌐 Website: cogeng.net Facebook: Excavator SolenoidValve
#ExcavatorWiringHarness #ExcavatorThrottleMotor #ExcavatorSolenoidValve #ExcavatorSealKit
