COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC

COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC

Product name: CAT  Foot Pedal Valve
Part No: 561-7001 5617001 561-7001, 309-5808, 247-5275, 520-1347, 307-3993
Model Number:For    301.7 320GC 336G
Material:Lron+Rubber
Packing:PP bag inside, carton box outside
Payment Terms:Western Union, L/C, T/T, MoneyGram, D/A, D/P
MOQ:Acceptable trial order
Shipping Mode:By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.)
Place of Origin:Guangdong, China
Brand name:COGENG
CertifiCATEEion:ISO9001
Supply :500PCS
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC
  • COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 561-7001 Foot Pedal Valve CAT 320GC 330GC

Desciption

For Part Number: 561-7001 (5617001)

CAT Foot Pedal Valve — Caterpillar Mini & Medium Excavators

Document Version: 1.0
Date of Issue: October 26, 2023
Product Category: Hydraulic Components / Excavator Control Valve
Brand: Aftermarket Replacement
Manufacturer Reference: Caterpillar OEM Reference
Application: Foot Pedal Valve (Travel / Attachment Control)

1. PRODUCT OVERVIEW

1.1 Introduction

This document serves as the comprehensive technical specification for the foot pedal valve identified by part number 561-7001 (also formatted as 5617001). This part is a critical hydraulic control component used in Caterpillar mini and medium excavators, including the 301.7, 320GC, and 336G models. The foot pedal valve allows the operator to control various hydraulic functions using foot-operated pedals, providing precise and intuitive control during machine operation.

The purpose of this document is to provide engineers, mechanics, procurement specialists, and maintenance teams with a complete understanding of the physical specifications, compatibility, installation protocols, and maintenance requirements for this specific foot pedal valve.

1.2 Product Description

The 561-7001 is a precision-engineered Foot Pedal Valve designed as a direct replacement for the Caterpillar OEM part. This valve is an integral component of the excavator's hydraulic control system, converting mechanical foot pedal movement into precise hydraulic pressure signals that control various machine functions.

The foot pedal valve is commonly used for:

  • Travel Control: On mini excavators, foot pedals are often used to control travel (forward/reverse) of the tracks, allowing the operator to use hand controls for boom, arm, and bucket functions simultaneously.

  • Attachment Control: On larger excavators, foot pedals may control auxiliary hydraulic functions such as breaker, shear, or grapple operation.

  • Steering Control: On wheeled excavators, foot pedals may assist with steering functions.

  • Blade Control: On models equipped with a dozer blade, foot pedals may control blade lift and angle.

This component is essential for safe and efficient machine operation, allowing the operator to multitask and maintain precise control over multiple functions. The valve is engineered to withstand the demanding operating conditions of construction equipment, including high pressures, temperature extremes, vibration, and contamination.

Key Functional Characteristics:

  • Precise Control: Provides smooth, proportional control of hydraulic functions.

  • Ergonomic Design: Pedal position and resistance are designed for operator comfort and control.

  • Durable Construction: Resistant to vibration, temperature extremes, and contamination.

  • OEM-Compatible: Direct replacement for Caterpillar 561-7001 and related part numbers.

  • Easy Installation: Designed for straightforward replacement with standard tools.

  • Quality Assurance: Manufactured under ISO 9001 quality management system.

1.3 Key Technical Features

  1. Direct OEM Replacement: Designed to replace Caterpillar 561-7001, 309-5808, 247-5275, 520-1347, and 307-3993 without modification.

  2. Precision Manufacturing: All internal components machined to exacting tolerances.

  3. High-Quality Seals: Durable seals resist hydraulic oil, temperature, and contamination.

  4. Corrosion-Resistant Body: Constructed from high-grade steel or aluminum.

  5. Smooth Operation: Precision-machined spool and bore for responsive pedal feel.

  6. Adjustable Pedal: Some configurations allow pedal angle and stroke adjustment for operator preference.

  7. Easy Installation: Plug-and-play design for straightforward replacement.

  8. Wide Compatibility: Fits multiple Caterpillar excavator models across different series.

2. PARTS LIST

The following list details the components included in or associated with the 561-7001 foot pedal valve. This part is typically a complete assembly, but the following table details the main components.

2.1 Main Assembly Components

Item No. Part Number Description Quantity Material
1 561-7001 Foot Pedal Valve Assembly 1 Steel / Aluminum
2 561-7001-B Valve Body 1 Steel
3 561-7001-S Spool / Plunger 1 Hardened Steel
4 561-7001-SP Spring 2 Spring Steel
5 561-7001-OR O-Ring Kit 1 NBR
6 561-7001-P Pedal Assembly 1 Steel / Rubber
7 561-7001-L Linkage 1 Steel
8 561-7001-F Fitting / Port 2 Steel

Note: The specific components and part numbers may vary slightly based on the specific production batch. Always verify with the serial number of your machine.

2.2 Related Service Components

When replacing a foot pedal valve, the following components should be inspected and replaced if necessary:

  • O-Rings and Seals: Always replace O-rings when installing a new valve.

  • Hydraulic Hoses: Inspect for cracks, leaks, or damage.

  • Pedal Pivot Bushings: Inspect for wear or excessive play.

  • Return Springs: Inspect for fatigue or breakage.

  • Hydraulic Filter: Replace if contamination is suspected.

2.3 Material Specifications

Property Specification
Valve Body Material High-grade steel or aluminum
Spool Material Hardened steel
Seal Material NBR (Nitrile Butadiene Rubber)
Spring Material Spring steel
Pedal Material Steel with rubber pad
Operating Pressure Up to 350 bar (dependent on application)
Temperature Range -20°C to +100°C
Weight Approx. 1.5-3.0 kg (Complete Assembly)

Item | Description

Part Number Format: 561-7001 (with hyphen) / 5617001 (without separator) / CA5617001 (alternative number)

Product Name: Foot Pedal Valve / Pedal Control Group

Technical Specifications: Voltage: 4.5–5.5V; Output Signal: PWM; Connector: 6-pin DT; Housing: Cast Aluminum Alloy; Cable Length: 11.8 inches

Compatible Excavators:

  • GC Series: 320GC, 323GC, 326GC, 330GC, 336GC, 345GC, 349GC, 333GC, 315GC, 313GC

  • Standard Series: 313, 315, 320, 323, 326, 330, 336, 340, 349, 350, 352, 355, 395

  • Mini Excavators: 301.7, 302.7, 303, 304, 305, 306, 307.5, 308, 309, 310

  • Other Equipment: Wheel Loaders 930M, 938M; Bulldozer D5; Material Handlers MH3250, MH3260

Alternative Part Numbers: 490-1012 (marked as an alternative part number by some suppliers)

Function Description: Detects pedal angle and sends a PWM signal to control machine travel speed and direction.

3. COMPATIBLE MODELS

The part number 561-7001 is primarily designed for Caterpillar mini and medium excavators. The following compatibility information is compiled from multiple industry sources.

3.1 Primary Compatibility (Caterpillar Excavators)

This part is most commonly found on the following machine models:

  • Caterpillar 301.7 (Mini Excavator)

  • Caterpillar 301.7 CR (Mini Excavator)

  • Caterpillar 320GC (Medium Excavator)

  • Caterpillar 336G (Medium Excavator)

  • Caterpillar 336GC (Medium Excavator)

3.2 Additional Compatibility (Caterpillar Excavators)

Based on cross-reference data, the 561-7001 may also be compatible with:

  • Caterpillar 302.7 (Mini Excavator)

  • Caterpillar 303.5 (Mini Excavator)

  • Caterpillar 304 (Mini Excavator)

  • Caterpillar 305 (Mini Excavator)

  • Caterpillar 306 (Mini Excavator)

  • Caterpillar 307 (Mini Excavator)

  • Caterpillar 308 (Mini Excavator)

  • Caterpillar 310 (Mini Excavator)

  • Caterpillar 313 (Medium Excavator)

  • Caterpillar 315 (Medium Excavator)

  • Caterpillar 318 (Medium Excavator)

  • Caterpillar 320 (Medium Excavator)

  • Caterpillar 323 (Medium Excavator)

  • Caterpillar 326 (Medium Excavator)

  • Caterpillar 330 (Medium Excavator)

  • Caterpillar 340 (Medium Excavator)

  • Caterpillar 349 (Medium Excavator)

  • Caterpillar 352 (Medium Excavator)

  • Caterpillar 374 (Large Excavator)

  • Caterpillar 390 (Large Excavator)

  • Caterpillar 395 (Large Excavator)

3.3 Cross-Reference Numbers

When searching for this part, you may encounter the following interchangeable or superseded part numbers :

Warning: While these numbers are often interchangeable, the specific suffix number usually denotes a specific revision or application. Always confirm the exact valve specifications before ordering.

3.4 Related Part Numbers

The following part numbers are related to the 561-7001 and may be used in the same hydraulic control system:

  • 561-7002 (Alternate configuration)

  • 561-7003 (Alternate configuration)

  • 561-7004 (Alternate configuration)

4. INSTALLATION PRECAUTIONS

Installing a foot pedal valve is a precision operation. Failure to follow these precautions can result in immediate damage to the valve, hydraulic contamination, or personal injury.

4.1 Pre-Installation Checklist

  1. Verify Part Number: Ensure the new foot pedal valve matches the old valve exactly. Check the mounting configuration, port locations, and pedal design.

  2. Cleanliness: The hydraulic system is highly sensitive to contamination. Clean the area around the valve before removal.

  3. Hydraulic Oil: Check the hydraulic tank for debris or metallic particles. If the old valve failed catastrophically, the entire hydraulic system must be flushed.

  4. Inspect Mating Parts: Check the mounting bracket for wear or damage. Check the hydraulic hoses for cracks or leaks. Check the pedal pivot for excessive play.

  5. Check Electrical System: If the valve includes an electrical switch (e.g., for travel alarm), verify the electrical connections.

  6. Safety First: Ensure the machine is parked on level ground, the engine is off, and the hydraulic system is depressurized before beginning work. Lower all attachments to the ground.

4.2 Installation Procedure

  1. Disassembly: Carefully disconnect the hydraulic hoses and remove the old foot pedal valve. Use proper tools to avoid damaging the mounting bracket or hydraulic fittings. Cap all hydraulic lines to prevent contamination.

  2. Cleaning: Thoroughly clean the mounting area and hydraulic fittings. Remove any debris or old seal material.

  3. Inspection: Inspect the mounting bracket for wear, cracks, or damage. If damaged, the bracket may need to be replaced or repaired.

  4. Seal Installation: Install new O-rings on the new foot pedal valve fittings. Lubricate with clean hydraulic oil.

  5. Valve Installation: Carefully position the new foot pedal valve on the mounting bracket. Install and tighten mounting bolts to the specified torque.

  6. Hydraulic Connection: Connect the hydraulic hoses to the new valve. Ensure the fittings are tight and leak-free.

  7. Electrical Connection: If applicable, connect the electrical switch connector. Ensure it clicks into place and is secure.

  8. Pedal Adjustment: Adjust the pedal angle and stroke to the operator's preference, if applicable.

4.3 Pre-Startup and Testing

This is the most critical step.

  1. Fill Casing: Before starting the engine, ensure the hydraulic system is filled to the proper level.

  2. Air Bleeding:

    • Start the engine at low idle.

    • Slowly operate the foot pedal to circulate oil through the valve.

    • Check for leaks around the valve and fittings.

  3. Functional Test:

    • Start the engine and operate the function controlled by the foot pedal valve.

    • Verify smooth and responsive operation.

    • Check for proper return to neutral when the pedal is released.

  4. Check for Leaks: Inspect all connections for leaks while the system is under pressure.

  5. Final Check: Check the hydraulic oil level in the tank and top up if necessary.

4.4 Safety Warnings

  • Crush Hazard: The foot pedal valve is part of a heavy hydraulic system. Ensure proper support is used.

  • High Pressure: Hydraulic fluid under pressure can penetrate the skin. Relieve pressure before disconnecting lines.

  • Hot Oil: Allow the system to cool before servicing.

  • Pinch Points: Keep hands and fingers away from moving parts during installation.

  • Falling Load Hazard: Always lower attachments to the ground before servicing hydraulic components.

  • Sudden Movement Hazard: Ensure the machine cannot move unexpectedly during testing. Block tracks if necessary.

5. COMPATIBLE EXCAVATORS

This section provides a detailed breakdown of the excavators compatible with the 561-7001, including specific model years and regional variations.

5.1 Caterpillar Mini Excavators (Primary Application)

The 561-7001 foot pedal valve is commonly used in Caterpillar 301.7 and related mini excavators. These machines are ubiquitous in the construction, landscaping, and utility sectors.

  • Caterpillar 301.7: Produced in the 2010s to present. This model is known for its compact size and versatility. The 561-7001 is a direct fit for the foot pedal valve.

  • Caterpillar 301.7 CR: Compact radius version of the 301.7. The valve specification remains consistent.

  • Caterpillar 302.7: Slightly larger mini excavator. The 561-7001 is compatible.

  • Caterpillar 303.5: Mid-size mini excavator. The 561-7001 is compatible.

  • Caterpillar 304: Mini excavator. The 561-7001 is compatible.

  • Caterpillar 305: Mini excavator. The 561-7001 is compatible.

  • Caterpillar 306: Mini excavator. The 561-7001 is compatible.

  • Caterpillar 307: Mini excavator. The 561-7001 is compatible.

  • Caterpillar 308: Mini excavator. The 561-7001 is compatible.

5.2 Caterpillar Medium Excavators (Primary Application)

The 561-7001 foot pedal valve is also used in Caterpillar 320GC and 336G medium excavators. These machines are among the most popular excavators in the world.

  • Caterpillar 320GC: Produced in the 2010s to present. The "GC" designation indicates a "General Construction" configuration. The 561-7001 is a direct fit for the foot pedal valve.

  • Caterpillar 336G: Produced in the 2010s to present. The 561-7001 is a direct fit.

  • Caterpillar 336GC: General Construction version of the 336. The 561-7001 is compatible.

  • Caterpillar 313: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 315: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 318: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 320: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 323: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 326: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 330: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 340: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 349: Medium excavator. The 561-7001 is compatible.

  • Caterpillar 352: Medium excavator. The 561-7001 is compatible.

5.3 Caterpillar Large Excavators

  • Caterpillar 374: Large excavator. The 561-7001 is compatible.

  • Caterpillar 390: Large excavator. The 561-7001 is compatible.

  • Caterpillar 395: Large excavator. The 561-7001 is compatible.

5.4 Verification Guide

To ensure compatibility with your specific machine:

  1. Locate the Serial Number: Find the machine's serial number plate (usually in the cab).

  2. Check the Parts Manual: Consult the official Caterpillar parts manual for your specific serial number range.

  3. Visual Inspection: Compare the old foot pedal valve with the new valve. Check the mounting configuration, port locations, and pedal design.

  4. Check the Hydraulic System: Verify the operating pressure and flow requirements of your machine's hydraulic system.

  5. Cross-Reference the Part Number: Use the Caterpillar parts catalog to confirm the 561-7001 is the correct part for your machine.

6. FREQUENTLY ASKED QUESTIONS (FAQ)

Q1: What is the part number 561-7001 exactly?
A: The 561-7001 is a Foot Pedal Valve used in Caterpillar mini and medium excavators, including the 301.7, 320GC, and 336G. It is a hydraulic control component that allows the operator to control various machine functions using foot-operated pedals.

Q2: What does a foot pedal valve do?
A: A foot pedal valve converts mechanical foot pedal movement into hydraulic pressure signals. This allows the operator to control functions such as travel (on mini excavators), auxiliary attachments (breaker, shear, grapple), steering (on wheeled excavators), or blade control (on models with dozer blades).

Q3: What are the symptoms of a bad foot pedal valve?
A: Symptoms of a bad foot pedal valve include:

  • Loss of function: The controlled hydraulic function does not operate.

  • Erratic operation: The function operates inconsistently.

  • Sticking pedal: The pedal does not return to neutral when released.

  • Leaks: Hydraulic fluid may leak from the valve.

  • Excessive play: The pedal has excessive free play.

  • Noisy operation: Whining or groaning sounds.

Q4: Is this a direct replacement for the original Caterpillar part?
A: Yes, the 561-7001 is designed as a direct replacement for the Caterpillar OEM part. It is also cross-compatible with 309-5808, 247-5275, 520-1347, and 307-3993 .

Q5: What is the warranty period for this part?
A: Standard warranty for these hydraulic components is typically 6 to 12 months, depending on the supplier. However, warranty is void if the unit is disassembled, if the system was not flushed after a previous failure, or if the wrong hydraulic oil was used.

Q6: Can I use this foot pedal valve on a different brand of excavator?
A: It is not recommended unless you are a qualified hydraulic engineer. While the valve might physically fit, the hydraulic characteristics and pedal design may not match the host machine's system, leading to poor performance or failure.

Q7: What type of hydraulic oil should I use?
A: Always use the oil specified by the excavator manufacturer. Typically, this is an ISO VG 46 anti-wear hydraulic oil. Using the wrong viscosity can cause overheating and internal damage.

Q8: Do I need to replace the hydraulic filter after installing a new foot pedal valve?
A: Yes. It is highly recommended to replace the return filter and the suction filter immediately after installation. If the old valve failed, the system should be flushed with a flushing fluid, and the filters replaced again after 50 hours of operation.

Q9: What is the typical lead time for this part?
A: Lead times vary. Standard stock items may ship within 24-48 hours. Custom or non-stock items may take 15-30 days for manufacturing or sourcing.

Q10: How do I identify if I have a genuine OEM part or an aftermarket replacement?
A: Genuine OEM parts will have the Caterpillar logo and part number cast or stamped into the metal. Aftermarket parts may have the part number but lack the logo. Aftermarket parts can be of high quality (e.g., from reputable manufacturers) or low quality. Always source from a trusted supplier.

Q11: What is the difference between 561-7001 and other 561-70 numbers?
A: The base number "561-70" indicates the series. The suffix (e.g., -01) indicates the specific revision, configuration, or application. Always match the complete part number.

Q12: Can I rebuild the foot pedal valve instead of replacing it?
A: Yes, foot pedal valves are rebuildable in some cases. However, it requires specialized tools, a clean environment, and technical expertise. Rebuilding is often more cost-effective than replacement if the core is in good condition. However, replacing the complete valve is often the more reliable option.

Q13: How do I test a foot pedal valve?
A: To test a foot pedal valve:

  1. Visual Inspection: Check for external leaks, damaged pedal, or excessive play.

  2. Functional Test: Operate the pedal and observe the controlled function.

  3. Pressure Test: Use a pressure gauge to verify the valve is delivering the correct pressure.

  4. Leak Test: Inspect for external leaks.

Q14: What causes foot pedal valve failure?
A: Foot pedal valve failure can be caused by:

  • Contamination: Dirt or debris in the hydraulic fluid.

  • Wear: Internal wear of the spool or bore.

  • Seal degradation: Age, heat, or chemical attack.

  • Spring fatigue: Broken or weakened return springs.

  • Pedal damage: Bent or broken pedal linkage.

Q15: Can I install this foot pedal valve myself?
A: Yes, if you have mechanical experience and the proper tools. However, hydraulic systems are complex and can be dangerous. If you are unsure, consult a qualified mechanic.

7. TECHNICAL SPECIFICATIONS SUMMARY

Parameter Specification
Part Number 561-7001 (5617001)
Type Foot Pedal Valve
Series 561-70
Cross-Reference 309-5808, 247-5275, 520-1347, 307-3993
Material Steel, NBR, PU
Max Pressure 350 bar (Operating) / 400 bar (Peak)
Temperature Range -20°C to +100°C
Oil Type ISO VG 46 Anti-Wear Hydraulic Oil
Weight Approx. 1.5-3.0 kg (Complete Assembly)
Application Travel / Attachment Control
Certification ISO 9001
Country of Origin China (Aftermarket) / Japan (OEM)
Compatibility CAT 301.7, 320GC, 336G, and more

8. 🚚 SHIPPING DETAILS & RETURN POLICY

8.1 Shipping Details

We offer worldwide shipping for all our hydraulic components and spare parts. Our shipping partners include DHL, FedEx, UPS, and EMS to ensure fast and reliable delivery.

  • Shipping Methods:

    • Express Shipping: 3-7 business days for urgent orders.

    • Standard Shipping: 7-15 business days for regular orders.

    • Economy Shipping: 15-30 business days for bulk orders.

  • Shipping Costs:

    • Shipping costs are calculated based on the weight, dimensions, and destination of the package.

    • For bulk orders, please contact us for a customized shipping quote.

  • Packaging:

    • All parts are carefully packaged in protective materials to prevent damage during transit.

    • Each package is labeled with the part number and quantity for easy identification.

  • Tracking:

    • Once your order is shipped, you will receive a tracking number via email.

    • You can track your order on the carrier's website.

8.2 Return Policy

We are committed to ensuring your satisfaction with our products. If you are not completely satisfied with your purchase, we offer a hassle-free return policy.

  • Return Eligibility:

    • Returns are accepted within 30 days of delivery.

    • The item must be unused, in its original packaging, and in the same condition as received.

    • A valid proof of purchase (order number or receipt) is required.

  • Non-Returnable Items:

    • Custom-made or special-order parts.

    • Parts that have been installed or used.

    • Parts that have been damaged due to improper installation or handling.

  • Return Process:

    1. Contact our customer service team to request a return authorization (RA) number.

    2. Pack the item securely in its original packaging.

    3. Ship the item back to the address provided by our customer service team.

    4. Once we receive and inspect the item, we will process your refund or exchange.

  • Refunds:

    • Refunds will be processed within 5-7 business days after we receive the returned item.

    • Refunds will be issued to the original payment method.

    • Shipping costs are non-refundable unless the return is due to our error.

  • Exchanges:

    • If you need to exchange an item, please contact our customer service team.

    • Exchanges are subject to product availability.

9. 📞 CONTACT & ORDERING

For orders, inquiries, or technical support, please contact us using the following details:

Email: hugo@cogeng.net
Phone: +86 18529131515
WhatsApp: +86 18529131515
Website: cogeng.net

9.1 How to Order

  1. Identify Your Part Number: Use your machine's parts manual or contact us for assistance.

  2. Request a Quote: Send us an email or WhatsApp message with the part number and quantity.

  3. Confirm Your Order: We will provide a proforma invoice for your confirmation.

  4. Make Payment: We accept T/T, Western Union, and other payment methods.

  5. Receive Your Order: We will ship your order promptly and provide tracking information.

9.2 Customer Support

Our team of experienced professionals is available to assist you with:

  • Part identification and compatibility verification.

  • Technical support and installation guidance.

  • Shipping and logistics inquiries.

  • Warranty and return requests.

Business Hours: Monday to Saturday, 9:00 AM – 6:00 PM (GMT+8)

*shipping Details Return Sales*
Sales price:
Please contact COGENG sales customer service for specific prices.
Shipping method:
The specific arrangement will be based on the cargo situation.
Estimated delivery time:
It is based on the shipping time of the logistics company, and the arrival time shown shall prevail.
Contact details are at the bottom.
MerchantReturnPolicy:
The products shipped are not returnable or exchangeable.

Contact COGENG

📞 Phone: +86-185-2913-1515                      🌐  Instagram

📧 Email: hugo@cogeng.net                         🌐  Facebook:Excavator Parts Selection and Replacement Community

💬 WhatsApp +86-185-2913-1515                       Facebook:   Excavator Wiring Harness

 💬 WeChat: +86-185-7865-1106                         Facebook:   Excavator Wire Harness

🌐 Website: cogeng.net                                        Facebook:   Excavator SolenoidValve

Excavator Solenoid Valve Excavator Wiring Harness Excavator Seal Kit 
Excavator Pressure Sensor Excavator Revolution Sensor  Excavator Water Temp Sensor
Excavator Control Panel  Excavator Switch Parts Excavator  Motors
Excavator Hydraulic Pump Excavator Other parts  Excavator Engine Oil 

Leave a message
FirstName *
LastName *
Email *
WhatsApp *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us