COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2
  • COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2
  • COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2

COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2

Caterpillar Harness Assembly — Part No. 306-8718 / 3068718

Compatible with 315DL、319DL、319DLN . Made of iron and rubber for reliable performance. Packed in PP bag inside and carton box outside. Brand: COGENG. Origin: Guangdong, China. ISO9001 certified. MOQ: trial order acceptable. Supply capacity: 500PCS. Payment: Western Union, L/C, T/T, MoneyGram, D/A, D/P. Shipping: by air, sea, or express (FedEx, UPS, DHL, TNT, etc.).?
  • COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 306-8718 Engine Harness CAT 315DL 319DL C4.2

Desciption

Product Parameter Table

Parameter Specification
Product Name Caterpillar Engine Wiring Harness / Engine-to-ECM Interconnect Harness
Primary Part Number 306-8718 (3068718)
Brand COGENG (Premium Aftermarket Replacement)
Condition Brand New, 100% Continuity & Dielectric Withstand Tested
Engine Compatibility Caterpillar C4.2 ACERT Diesel Engine
Compatible Equipment Caterpillar 315D L, 319D L, 319D LN Hydraulic Excavators 
Harness Type Engine Wiring Harness — ECM, Injectors, Sensors, and Actuators Interconnect 
Wire Insulation Cross-Linked Polyethylene (XLPE) with PTFE Overwrap in High-Temperature Zones; SAE J1128 Type SXL/GXL; Rated -40°C to +125°C
Connector Systems Deutsch DT, Deutsch DTM, Deutsch HD30, Integrated ECM Connector with Gold-Plated Terminals 
Protective Sheathing High-Temperature Corrugated Nylon Split-Loom Conduit; Self-Fusing Silicone Tape at All Branch Junctions; Adhesive-Lined Dual-Wall Heat Shrink Boots at All Connector Backshells
Voltage Rating 24V DC System
Environmental Sealing IP67 Rated Mated Connectors with Silicone Interfacial Seals, Peripheral Gaskets, and Cavity Plugs in All Unused Positions
Chemical & Abrasion Resistance Resistant to Diesel Fuel, Engine Oil, Hydraulic Fluid, Engine Coolant, and Commercial Degreasing Solvents; Exceeds SAE J1128 Abrasion Standards
Quality Assurance 100% Automated Pin-to-Pin Continuity Mapping Against OEM Schematic; Dielectric Withstand Test; Computer-Monitored Crimp Force Recording; 10x Magnification Visual Inspection
Certification ISO 9001 Certified Manufacturing Facility
Place of Origin Guangdong, China
Supply Capacity 300 Pieces per Month
Shipping Weight Approx. 1.0 – 1.5 kg (Configuration Dependent) 
Package Dimensions 40 x 30 x 15 cm (Coiled and Flat-Packed in Protective Carton)
Packing Inner: PP Bag with Anti-Static Protection; Outer: Heavy-Duty Export-Grade Corrugated Carton Box with Custom-Cut Protective Foam
Payment Terms Western Union, L/C, T/T, MoneyGram, D/A, D/P
Shipping Mode By Air, By Sea, By Express (FedEx, UPS, DHL, TNT)
Minimum Order Quantity Acceptable Trial Order — Single Unit Orders Welcome
Return Policy Non-Returnable / Non-Exchangeable (Comprehensive DOA Guarantee Included)

PRODUCT OVERVIEW

The COGENG Engine Wiring Harness, part number 306-8718 (3068718), is a precision-manufactured electrical distribution harness engineered as a direct, form-fit-function replacement for the Caterpillar C4.2 ACERT diesel engine, as installed in the 315D L, 319D L, and 319D LN hydraulic excavators .

The Caterpillar 300D-series excavators are 15- to 19-ton class machines that rely on the C4.2 ACERT engine for efficient power delivery . The compact design of the C4.2 engine bay, however, traps extreme heat. Over time, the factory wiring harness can suffer from baked insulation, cracked wiring, and failed connectors, leading to erratic sensor data, sudden engine derating, and communication loss with the ECM . This harness is the critical electrical link between the Engine Control Module (ECM) and the engine-mounted components, including the fuel injectors, rail pressure sensors, and speed/timing sensors .

When the 306-8718 harness fails, the symptoms are distinct and can be diagnosed via Caterpillar ADEM fault codes. A compromised harness is a highly likely cause of the following:

  • CID 0001 through 0004 (Injector Cylinder 1-4 Open Circuit): The engine runs rough, vibrates, lacks power, and emits white or black smoke. The harness routes directly to the electronic fuel injectors, and constant vibration can snap internal copper wires near the injector plugs .

  • CID 0164 (Injector Actuation Pressure Sensor Fault): The machine experiences idle surging, stalls under load, or enters "Limp Mode." Rubbed insulation against the engine block can cause a short-to-ground or short-to-battery .

  • CID 0190 (Primary Engine Speed/Timing Signal Abnormal): The excavator cranks endlessly without starting or shuts down suddenly. Degraded shielding in the harness allows electromagnetic interference to scramble the millisecond-accurate timing signal .

COGENG's 306-8718 aftermarket harness is engineered to resolve these failure modes. We use premium XLPE-insulated wire rated for high-temperature continuous operation, multi-layer thermal protection, self-fusing silicone tape at branch junctions for permanent moisture sealing, and precision-machined gold-plated connector contacts to resist fretting corrosion. Every terminal is solid-barrel and computer-crimped, and the complete harness is 100% continuity and dielectric tested before shipment. The harness is built on a precision OEM jig for guaranteed drop-in fit.

COMPATIBLE CATERPILLAR EQUIPMENT

The 306-8718 harness is validated for the following C4.2-powered Caterpillar platforms. Always provide your complete machine PIN and engine serial number for final compatibility verification.

Brand Model Equipment Type Engine
Caterpillar 315D L Hydraulic Excavator C4.2 ACERT 
Caterpillar 319D L Hydraulic Excavator C4.2 ACERT 
Caterpillar 319D LN Hydraulic Excavator C4.2 ACERT 

Note: Some aftermarket sources also list compatibility with the 312D, 313D, and 315D models . Verification with your specific machine PIN is mandatory.

PARTS LIST (Included in Package)

  1. Complete Engine Wiring Harness Assembly (1 unit): Fully assembled, jig-built harness with all connectors, solid-barrel terminals, protective conduit sheathing, thermal shielding layers, factory-positioned P-clips, and identification labels pre-installed.

  2. Integrated ECM Connector Assembly: The primary ECM connector body with all gold-plated terminals, silicone interfacial seal, and adhesive-lined heat shrink strain relief boot pre-installed.

  3. All Sensor, Injector, and Actuator Connectors: Every branch is pre-terminated with the correct solid-barrel contacts, silicone wire seals, and plastic cavity plugs in unused positions.

  4. High-Current Power and Ground Terminals: Heavy-gauge power cables terminated with tin-plated, closed-barrel copper ring terminals, each sealed with dual-wall adhesive-lined heat shrink.

  5. PP Bag Inner Packing and Export Carton: The harness is sealed in a PP bag with anti-static protection and flat-packed in a rigid, double-wall corrugated carton with custom-cut protective foam and "Do Not Cut — Electrical Harness Inside" labels.

COMPATIBILITY NOTES: CRITICAL VERIFICATION GUIDE

  1. C4.2 Engine Specificity: The 306-8718 harness is designed for the Caterpillar C4.2 ACERT engine. It is not compatible with C6.6, C7, C9, or C13 engine platforms, which use different harness configurations.

  2. Engine Harness Section: The 306-8718 is an engine wiring harness. It connects the engine ECM to the engine-mounted sensors, injectors, and actuators. It is not the chassis harness or the complete machine harness. Please verify the specific section you are replacing before ordering .

  3. Serial Number Verification is Mandatory: Caterpillar implemented running production changes across the 315D and 319D series. Providing your complete machine PIN and engine serial number (ESN) allows our technical team to verify the exact harness variant your machine requires.

  4. Related Part Numbers: The 306-8718 may be related to or supersede other Caterpillar harness part numbers for the C4.2 platform. Our technical team can cross-reference your machine's parts catalog to confirm the correct current-revision part number.

  5. Professional Installation Required: Installing an engine wiring harness requires routing through tight engine bay clearances, proper securing at all mounting points, and verification of all connections. The C4.2 engine has specific routing paths designed to keep wiring away from the high-heat exhaust manifold and cooling fan. You must route the new harness exactly along the original factory path, utilizing all provided P-clips and zip-tie anchor points . Installation should be performed by a qualified heavy equipment technician with access to Caterpillar Electronic Technician (ET) diagnostic software.

INSTALLATION PROCEDURE

Note: This is a summarized procedural guide. Always follow the Caterpillar service manual for your specific model.

Step 1: Safety Lockout and Documentation
Disconnect negative (-) and positive (+) battery cables. Mandatory ECM Power Down: Before disconnecting the old harness, you MUST turn off the battery disconnect switch. Unplugging the 306-8718 harness while the system is energized will cause voltage spikes that can permanently destroy the Cat ECM motherboard . Photograph every aspect of the existing harness routing, documenting all P-clip locations, routing around the engine, and all connector orientations.

Step 2: Old Harness Systematic Removal
Label every connector with numbered wire tags as it is disconnected. Disconnect the ECM connector(s), all engine sensor connectors, injector pass-through, and actuator connectors. Cut zip ties, release P-clips, and carefully extract the old harness.

Step 3: New Harness Visual Comparison
Uncoil the new COGENG harness beside the old harness. Compare ECM connector, branch lengths, connector types, and mounting clip positions. Verify every match before proceeding.

Step 4: New Harness Routing and Connection
Route the harness following the photographic reference and the specific C4.2 routing compliance requirements. Secure at all P-clip locations. Connect the ECM connector first. Connector Preparation: Do not force the main multi-pin connectors into the ECM. Inspect the pins on the ECM side first. Use a fast-drying electronic contact cleaner to remove any diesel fuel, oil, or dust. Ensure the rubber weather seals on the new harness plugs are seated correctly before locking them into place to prevent future moisture intrusion . Systematically reconnect all sensor, injector, and actuator branches. Verify clearance from exhaust, turbo, and all moving components.

Step 5: Power-Up and Full Functional Test
Reconnect batteries. Connect Caterpillar Electronic Technician (ET). Verify no active diagnostic trouble codes. Start the engine and verify immediate oil pressure. Monitor all parameters. Warm to operating temperature. Cycle all functions. Confirm zero fault codes after complete test.

🚚 SHIPPING DETAILS & RETURN POLICY

Shipping Details

Detail Description
Shipping Methods By Air: Cost-effective for medium-weight orders. By Sea: Most economical for bulk orders. By Express (FedEx, UPS, DHL, TNT): Fastest door-to-door service for machine-down emergencies.
Estimated Delivery Time Express: 3-5 business days. Air Freight: 8-15 days. Sea Freight: 30-45 days. Transit times are carrier-dependent. Tracking provided within one business day of dispatch.
Packing Inner: PP bag with anti-static protection. Outer: Heavy-duty export-grade corrugated carton box with custom-cut protective foam.
Payment Terms Western Union, L/C, T/T, MoneyGram, D/A, D/P. Standard terms: 30% T/T deposit, 70% balance before shipment.
Minimum Order Quantity Acceptable Trial Order — Single unit orders welcomed.

Return Policy

Policy Point Terms
Merchant Return Policy All sales are final. No returns or exchanges. A wiring harness cannot be restocked once departed from our controlled environment.
DOA Quality Guarantee Full replacement for manufacturing defects reported within 7 days of delivery. Harness must be in original, uninstalled condition.
Pre-Shipment Confirmation We send high-resolution photos of your exact harness for written approval before dispatch.

FREQUENTLY ASKED QUESTIONS

Q1: What are the symptoms of a failing 306-8718 harness?
A: Common symptoms include multiple injector circuit fault codes (CID 0001-0004), rough running, white/black smoke, idle surging, stalling under load, "Limp Mode," and cranking without starting due to speed/timing signal issues .

Q2: Will this harness fit both my 315D L and 319D L?
A: Yes. The 306-8718 is validated for the 315D L, 319D L, and 319D LN excavator platforms with the C4.2 engine . However, we always verify your specific machine serial number during pre-shipment confirmation.

Q3: Is this the complete machine harness or just the engine harness?
A: The 306-8718 is an engine wiring harness. It connects the engine ECM to the engine-mounted sensors, injectors, and actuators. It is not the complete machine harness (chassis harness and cab harness are separate) .

Q4: Do you accept trial orders for a single unit?
A: Yes, absolutely. We welcome trial orders for single units from first-time customers.

Q5: What certifications does COGENG hold?
A: COGENG is an ISO 9001 certified manufacturer, ensuring consistent manufacturing processes, rigorous inspection protocols, and full batch traceability.

*shipping Details Return Sales*
Sales price:
Please contact COGENG sales customer service for specific prices.
Shipping method:
The specific arrangement will be based on the cargo situation.
Estimated delivery time:
It is based on the shipping time of the logistics company, and the arrival time shown shall prevail.
Contact details are at the bottom.
MerchantReturnPolicy:
The products shipped are not returnable or exchangeable.

Contact COGENG

📞 Phone: +86-185-2913-1515                      🌐  Instagram

📧 Email: hugo@cogeng.net                         🌐  Facebook:Excavator Parts Selection and Replacement Community

💬 WhatsApp +86-185-2913-1515                       Facebook:   Excavator Wiring Harness

 💬 WeChat: +86-185-7865-1106                         Facebook:   Excavator Wire Harness

🌐 Website: cogeng.net                                        Facebook:   Excavator SolenoidValve

Excavator Solenoid Valve Excavator Wiring Harness Excavator Seal Kit 
Excavator Pressure Sensor Excavator Revolution Sensor  Excavator Water Temp Sensor
Excavator Control Panel  Excavator Switch Parts Excavator  Motors
Excavator Hydraulic Pump Excavator Other parts  Excavator Engine Oil 


Leave a message
FirstName *
LastName *
Email *
WhatsApp *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us