COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13

COGENG 266-1466 Throttle Position Sensor CAT C7 C13

Caterpillar Variable Frequency Pressure Sensor — Part No. 261466 / 266-1466?

Compatible with Cat C7、C10、C12、C13、3406E . Made of iron and rubber for reliable performance. Packed in PP bag inside and carton box outside. Brand: COGENG. Origin: Guangdong, China. ISO9001 certified. MOQ: trial order acceptable. Supply capacity: 500PCS. Payment: Western Union, L/C, T/T, MoneyGram, D/A, D/P. Shipping: by air, sea, or express (FedEx, UPS, DHL, TNT, etc.).
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13
  • COGENG 266-1466 Throttle Position Sensor CAT C7 C13,Excavator Solenoid Valve | Excavator Pressure Switch | Excavator Revolution Sensor | Excavator Wiring Harness | Excavator Throttle Motor --- COGENG High-Qulity Parts Service GAOGENG Provider,COGENG 266-1466 Throttle Position Sensor CAT C7 C13

Desciption

For Part Number: 266-1466 (261466)

COGENG Throttle Position Sensor — Caterpillar C7 / C10 / C12 / C13 / 3406E Engines

Document Version: 1.0
Date of Issue: November 05, 2026
Product Category: Electrical Components / Throttle Position Sensor
Brand: COGENG
Manufacturer Reference: Caterpillar OEM Reference
Application: Throttle Position Sensing

1. PRODUCT OVERVIEW

1.1 Introduction

This document serves as the comprehensive technical specification for the throttle position sensor identified by part number 266-1466 (also formatted as 2661466), supplied by COGENG. This part is a critical electronic sensing component used in a wide range of Caterpillar engines and heavy equipment, including the C7, C10, C12, C13, and 3406E engine families.

The purpose of this document is to provide engineers, mechanics, procurement specialists, and maintenance teams with a complete understanding of the physical specifications, compatibility, installation protocols, and maintenance requirements for this specific sensor.

1.2 Product Description

The 266-1466 is a precision-engineered Throttle Position Sensor (TPS) designed as a replacement for the Caterpillar OEM part. This sensor provides real-time feedback on throttle opening position to the Engine Control Module (ECM), enabling accurate engine control, improved fuel efficiency, and responsive performance .

Important Clarification: Based on available product data, the 266-1466 is identified as a Throttle Position Sensor, not a Variable Frequency Pressure Sensor. The part number "261466" appears to be a shortened or alternate format of 266-1466. If you require a pressure sensor, please verify the exact part number with your machine's parts manual.

This sensor is essential for the proper functioning of the engine's throttle control system. It detects the position of the throttle pedal or lever and transmits this information to the ECM, which then adjusts fuel delivery and engine speed accordingly. A malfunctioning TPS can lead to poor throttle response, erratic engine behavior, or fault codes.

The sensor is engineered to withstand the demanding operating conditions of heavy equipment, including vibration, temperature extremes, and contamination.

Key Functional Characteristics:

  • Throttle Position Sensing: Provides accurate feedback on throttle opening to the ECM .

  • 3-Pin Connector: Standard Caterpillar connector configuration .

  • Triangular Plug: Some variants feature a triangular connector shape .

  • Engine Compatibility: Designed for C7, C10, C12, C13, and 3406E engines .

  • Heavy-Duty Construction: Built to withstand severe vibration and environmental conditions.

  • COGENG Quality: Manufactured to meet or exceed OEM specifications.

  • ISO 9001 Certified: Manufactured under a certified quality management system.

1.3 Key Technical Features

  1. Direct OEM Replacement: Designed to replace Caterpillar 266-1466 and related part numbers .

  2. 3-Pin Connector: Standard interface for Caterpillar wiring harnesses .

  3. Triangular Plug Design: Matches specific Caterpillar harness configurations .

  4. Engine-Specific Design: Optimized for C7, C10, C12, C13, and 3406E engines .

  5. Durable Construction: Resistant to vibration, oil, and temperature extremes.

  6. Easy Installation: Direct fit for the specified applications.

  7. Quality Assurance: Manufactured under ISO 9001 quality management system.

2. PARTS LIST

The following list details the components included in or associated with the 266-1466 sensor. This part is typically a complete assembly.

2.1 Main Assembly Components

Item No. Part Number Description Quantity Material
1 266-1466 Throttle Position Sensor Assembly 1 Plastic / Electronic
2 266-1466-C Connector (3-Pin, Triangular) 1 Plastic / Metal
3 266-1466-S Seal / O-Ring 1 Rubber
4 266-1466-M Mounting Hardware 1 Steel

Note: The specific components and part numbers may vary slightly based on the specific production batch. Always verify with the serial number of your machine.

2.2 Related Service Components

When replacing a throttle position sensor, the following components should be inspected and replaced if necessary:

  • Wiring Harness: Inspect the connector for corrosion, damage, or loose pins.

  • Throttle Pedal / Lever: Inspect for mechanical binding or damage.

  • ECM: Verify no fault codes related to the throttle circuit.

2.3 Material Specifications

Property Specification
Housing Material Plastic 
Connector Material Plastic / Metal
Seal Material Rubber
Connector Pin Count 3-Pin 
Connector Shape Triangular 
Sensor Type Throttle Position 
Weight Approx. 0.14-0.20 kg 

Decompose pictures


3. COMPATIBLE MODELS

The part number 266-1466 is designed for a wide range of Caterpillar engines and equipment. The following compatibility information is compiled from multiple industry sources.

3.1 Primary Engine Compatibility

This sensor is commonly used with the following Caterpillar engines :

  • C7

  • C10

  • C12

  • C13

  • C15

  • 3406E

3.2 Primary Equipment Compatibility (Caterpillar)

This sensor is found on a wide range of Caterpillar equipment, including :

Off-Highway Trucks:

  • 769C, 769D, 770, 771D, 772, 773B, 773D, 773E, 775B, 775D, 775E, 777, 777C, 777D, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B

Wheel Loaders:

  • 950H, 950K, 962H, 966H, 966K, 972H, 972K, 980G, 980H, 980K, 988H, 988K, 990, 990H, 990K, 992K, 993K

Articulated Trucks:

  • 725, 730, 735, 740, D350E II, D400E II

Wheel Tractor-Scrapers:

  • 621H, 623H, 627G, 631G, 637G, 657G

Other Equipment:

  • Integrated Toolcarrier: IT62H

  • Landfill Compactors: 816F II, 826H, 826K, 836K

  • Load Haul Dump: R1600, R1700G, R2900G

3.3 Cross-Reference Numbers

When searching for this part, you may encounter the following interchangeable or related part numbers :

  • 266-1466 (Primary)

  • 2661466 (Alternate format)

  • 132484 (Related)

  • 204-7949 (Related)

  • 176-1602 (Related)

  • 3E7700 (Related)

  • 266-1466-03 (Revision)

Warning: While these numbers are often interchangeable, the specific suffix may denote a specific revision. Always confirm the exact part number before ordering.

4. INSTALLATION PRECAUTIONS

Installing a throttle position sensor is a precision operation. Failure to follow these precautions can result in immediate damage to the sensor, electrical system damage, or personal injury.

4.1 Pre-Installation Checklist

  1. Verify Part Number: Ensure the new sensor matches the old unit exactly. Check the connector type (3-pin triangular) and part number.

  2. Cleanliness: The mounting area must be clean. Prevent debris from entering the sensor or connector.

  3. Battery Disconnect: Disconnect the battery before beginning work to prevent electrical shock or short circuits.

  4. Inspect Mating Parts: Check the wiring harness connector for corrosion, damage, or loose pins. Inspect the throttle pedal/lever mechanism for binding.

  5. Safety First: Ensure the machine is parked on level ground, the engine is off, and all controls are in neutral.

4.2 Installation Procedure

  1. Disassembly: Carefully disconnect the old sensor from the wiring harness and remove it from the mounting location.

  2. Cleaning: Thoroughly clean the mounting area. Remove any debris or oil.

  3. Inspection: Inspect the throttle linkage for wear or damage. Replace if necessary.

  4. Seal Installation: Install a new O-ring or seal on the new sensor if applicable.

  5. Sensor Installation: Carefully install the new sensor. Ensure it seats fully and the connector is accessible.

  6. Connector Installation: Connect the 3-pin electrical connector. Ensure it clicks into place and is secure. Apply dielectric grease to the connector pins to prevent corrosion.

  7. Battery Connection: Reconnect the battery. Verify correct polarity.

4.3 Pre-Startup and Testing

  1. Visual Inspection: Inspect all connections for security and correct routing.

  2. Electrical Test: Turn the ignition on (engine off). Check for any diagnostic codes related to the throttle position sensor.

  3. Functional Test: Start the engine and operate the throttle through its full range. Verify smooth and responsive engine speed changes. Check for any fault codes.

  4. Final Check: Clear any logged codes and verify they do not return.

4.4 Safety Warnings

  • Electrical Hazard: Disconnect the battery before working on the electrical system.

  • Short Circuit Hazard: Ensure all connections are correct before reconnecting the battery.

  • Fire Hazard: Keep sparks and flames away from the battery and electrical components.

  • Pinch Points: Keep hands and fingers away from moving parts during installation.

  • Hot Surfaces: Allow the engine and exhaust components to cool before servicing.

  • Personal Protective Equipment: Wear safety glasses and insulated gloves when working on the electrical system.

5. COMPATIBLE EQUIPMENT

This section provides a detailed breakdown of the equipment compatible with the 266-1466.

5.1 Caterpillar Engines (Primary Application)

The 266-1466 TPS is widely used on Caterpillar C7, C10, C12, C13, C15, and 3406E engines . These engines power a vast range of Caterpillar equipment.

5.2 Caterpillar Off-Highway Trucks

Compatible with 769C, 769D, 773B, 773D, 773E, 775B, 775D, 775E, 777, 777C, 777D, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, and 797B models .

5.3 Caterpillar Wheel Loaders

Compatible with 950H, 950K, 962H, 966H, 966K, 972H, 972K, 980G, 980H, 980K, 988H, 988K, 990, 990H, 990K, 992K, and 993K models .

5.4 Verification Guide

To ensure compatibility with your specific machine:

  1. Locate the Serial Number: Find the machine's serial number plate.

  2. Check the Parts Manual: Consult the official Caterpillar parts manual for your specific serial number range.

  3. Cross-Reference the Part Number: Use the Caterpillar parts catalog to confirm the 266-1466 is the correct part for your machine.

  4. Verify Sensor Type: Confirm that your machine requires a throttle position sensor (not a pressure sensor) before ordering.

6. FREQUENTLY ASKED QUESTIONS (FAQ)

Q1: What is the part number 266-1466 exactly?
A: The 266-1466 is a Throttle Position Sensor (TPS) used in Caterpillar engines and equipment. It provides real-time feedback on throttle opening position to the ECM .

Q2: Is this a pressure sensor or a throttle position sensor?
A: Based on available product data, the 266-1466 is a Throttle Position Sensor, not a pressure sensor . The part number "261466" in the query appears to be a shortened format of 266-1466. If you need a pressure sensor, please verify the correct part number with your machine's parts manual.

Q3: What engines is this sensor compatible with?
A: It is compatible with Caterpillar C7, C10, C12, C13, C15, and 3406E engines .

Q4: What are the specifications of this sensor?
A: Key specifications include: 3-pin connector, triangular plug shape, plastic housing, and weight of approximately 0.14-0.20 kg .

Q5: What are the symptoms of a bad throttle position sensor?
A: Symptoms include poor throttle response, erratic engine speed, hesitation, stalling, and diagnostic fault codes related to the throttle circuit.

Q6: What is the warranty period for this part?
A: Standard warranty for COGENG electrical components is typically 6 to 12 months, depending on the supplier. Warranty is void if the unit is damaged during installation, if the system was not properly connected, or if the wrong voltage was applied.

Q7: Do I need to replace any other components when installing a new sensor?
A: It is recommended to inspect and replace the O-ring/seal, check the wiring harness connector for corrosion, and verify the throttle linkage for binding. Apply dielectric grease to the connector pins during installation.

Q8: What is the typical lead time for this part?
A: Lead times vary. Standard stock items may ship within 24-48 hours. Custom or non-stock items may take 15-30 days for manufacturing or sourcing. COGENG maintains a supply capacity of up to 500 PCS.

Q9: How do I identify if I have a genuine OEM part or an aftermarket replacement?
A: Genuine OEM parts will have the Caterpillar logo and part number. COGENG parts are aftermarket replacements manufactured to meet or exceed OEM specifications. Always source from a trusted supplier.

Q10: Can I use this sensor on a different brand of equipment?
A: It is not recommended unless you are a qualified electrical engineer. While the sensor might physically fit, the electrical characteristics and signal output may not match the host machine's system.

Q11: What is the difference between 266-1466 and other related part numbers?
A: The 266-1466 is the primary part number. Related numbers such as 132484, 204-7949, 176-1602, and 3E7700 are listed as interchangeable or related parts for the same application . Always verify with your specific machine's serial number.

Q12: How do I test a throttle position sensor?
A: To test the sensor:

  1. Visual Inspection: Check for physical damage, corrosion, or loose connectors.

  2. Resistance Test: Check the resistance between pins (consult service manual for specifications).

  3. Voltage Test: Check for reference voltage at the connector.

  4. Signal Test: Use a multimeter to check for a varying signal voltage as the throttle is moved.

Q13: What causes throttle position sensor failure?
A: Sensor failure can be caused by:

  • Wear: Internal wear of the sensing element.

  • Contamination: Dirt or oil ingress.

  • Vibration: Constant vibration can cause internal damage.

  • Heat: Excessive heat can damage electronic components.

  • Wiring damage: Broken or chafed wires.

Q14: Can I install this sensor myself?
A: Yes, if you have mechanical and electrical experience and the proper tools. However, heavy equipment systems are complex and can be dangerous. If you are unsure, consult a qualified mechanic.

7. TECHNICAL SPECIFICATIONS SUMMARY

Parameter Specification
Part Number 266-1466 (2661466)
Brand COGENG
Type Throttle Position Sensor (TPS)
Sensor Type Throttle Position 
Connector Pin Count 3-Pin 
Connector Shape Triangular 
Housing Material Plastic 
Weight Approx. 0.14-0.20 kg 
Engine Compatibility Caterpillar C7, C10, C12, C13, C15, 3406E
Application Throttle Position Sensing
Certification ISO 9001
Country of Origin Guangdong, China
Cross-Reference 132484, 204-7949, 176-1602, 3E7700

8. 🚚 SHIPPING DETAILS & RETURN POLICY

8.1 Shipping Details

We offer worldwide shipping for all our electrical components and spare parts. Our shipping partners include DHL, FedEx, UPS, TNT, and EMS to ensure fast and reliable delivery.

  • Shipping Methods:

    • Express Shipping: 3-7 business days for urgent orders.

    • Standard Shipping: 7-15 business days for regular orders.

    • Economy Shipping: 15-30 business days for bulk orders.

    • By Air or Sea: Available for bulk orders.

  • Shipping Costs:

    • Shipping costs are calculated based on the weight, dimensions, and destination of the package.

    • For bulk orders, please contact us for a customized shipping quote.

  • Packaging:

    • All parts are carefully packaged in PP bags inside and carton boxes outside to prevent damage during transit.

    • Each package is labeled with the part number and quantity for easy identification.

  • Tracking:

    • Once your order is shipped, you will receive a tracking number via email.

    • You can track your order on the carrier's website.

8.2 Return Policy

We are committed to ensuring your satisfaction with our products. If you are not completely satisfied with your purchase, we offer a hassle-free return policy.

  • Return Eligibility:

    • Returns are accepted within 30 days of delivery.

    • The item must be unused, in its original packaging, and in the same condition as received.

    • A valid proof of purchase (order number or receipt) is required.

  • Non-Returnable Items:

    • Custom-made or special-order parts.

    • Parts that have been installed or used.

    • Parts that have been damaged due to improper installation or handling.

  • Return Process:

    1. Contact our customer service team to request a return authorization (RA) number.

    2. Pack the item securely in its original packaging.

    3. Ship the item back to the address provided by our customer service team.

    4. Once we receive and inspect the item, we will process your refund or exchange.

  • Refunds:

    • Refunds will be processed within 5-7 business days after we receive the returned item.

    • Refunds will be issued to the original payment method.

    • Shipping costs are non-refundable unless the return is due to our error.

  • Exchanges:

    • If you need to exchange an item, please contact our customer service team.

    • Exchanges are subject to product availability.

*shipping Details Return Sales*
Sales price:
Please contact COGENG sales customer service for specific prices.
Shipping method:
The specific arrangement will be based on the cargo situation.
Estimated delivery time:
It is based on the shipping time of the logistics company, and the arrival time shown shall prevail.
Contact details are at the bottom.
MerchantReturnPolicy:
The products shipped are not returnable or exchangeable.

Contact COGENG

📞 Phone: +86-185-2913-1515                      🌐  Instagram

📧 Email: hugo@cogeng.net                         🌐  Facebook:Excavator Parts Selection and Replacement Community

💬 WhatsApp +86-185-2913-1515                       Facebook:   Excavator Wiring Harness

 💬 WeChat: +86-185-7865-1106                         Facebook:   Excavator Wire Harness

🌐 Website: cogeng.net                                        Facebook:   Excavator SolenoidValve

Excavator Solenoid Valve Excavator Wiring Harness Excavator Seal Kit 
Excavator Pressure Sensor Excavator Revolution Sensor  Excavator Water Temp Sensor
Excavator Control Panel  Excavator Switch Parts Excavator  Motors
Excavator Hydraulic Pump Excavator Other parts  Excavator Engine Oil 

Leave a message
FirstName *
LastName *
Email *
WhatsApp *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us