Product name: Komatsu Hydraulic Cylinder Seal Kit
Part No: 707-52-90260 7075290260
Size：50MM / 55MM
Model Number:For WA470-3 WA480-6 D115C-1 PC400LC
Material:Lron+Rubber
Packing:PP bag inside, carton box outside
Payment Terms:Western Union, L/C, T/T, MoneyGram, D/A, D/P
MOQ:Acceptable trial order
Shipping Mode:By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.)
Place of Origin:Guangdong, China
Brand name:COGENG
CertifiCATEEion:ISO9001
Supply :500PCS
Technical Constants & Performance Data
| Parameter | Value / Specification |
|---|---|
| Pressure Rating | Up to 5,000 PSI (345 bar) |
| Temperature Range | -40°F to 225°F (-40°C to 107°C) |
| Fluid Compatibility | Petroleum-based oils, synthetic hydrocarbons, Komatsu-approved fluids |
| Material Standards | Polyurethane (AU/CU), Nitrile Rubber (NBR), PTFE composites |
| Seal Hardness | 90-94 Shore A (Dynamic), 70 Shore A (Static) |
| Manufacturing Tolerance | ISO 3601 / AS568A standards |
| Quality Standard | Manufactured to meet or exceed original Komatsu technical specifications. |
Exact Model Compatibility
| Komatsu OEM Part Number | COGENG Replacement | Application Note |
|---|---|---|
| 707-52-90260 | 707-52-90260 | Direct OEM Replacement |
| Note: | This kit is designed as a direct, part-for-part replacement for Komatsu OEM part number 707-52-90260. The specific machine and cylinder application must be verified through Komatsu's official parts documentation. Compatibility is guaranteed when this OEM number is specified for the repair. |
Component Specifications Table
| Component Name | Material Specification | Standard | Function |
|---|---|---|---|
| Piston Seal | Polyurethane (OEM Grade) | ISO 7425-1 | Main dynamic pressure seal |
| Rod Seal | Cast Polyurethane Composite | ISO 6547 | Primary rod sealing |
| Wiper/Scraper | Polyurethane (Heavy-Duty) | ISO 6195 | Contaminant exclusion |
| Wear Ring/Guide Band | Glass-Filled PTFE | - | Piston/Rod guidance |
| O-Ring Set | Nitrile Rubber (NBR) | AS568A / ISO 3601 | Static sealing |
| Backup Rings | Nylon 6.6 | - | Anti-extrusion protection |
| Gland Seals | Various per OEM design | - | Complete gland sealing |
Installation decomposition diagram
Machine Secure & Pressure Relief: Park the dozer on a firm, level surface. Lower the blade fully to the ground to relieve all hydraulic pressure. Engage the parking brake and block the tracks.
Cleanliness Protocol: Disassembly and assembly must be performed in an impeccably clean, dust-controlled environment. The abrasive nature of dozer work makes contamination control paramount.
Documented Disassembly: Carefully disassemble the tilt cylinder. Photograph and note the exact order and orientation of all components, especially the seal stack in the gland.
Critical Metal Inspection: Use precision tools to inspect the cylinder rod for any scratches, gouges, or corrosion. Check the cylinder bore (ID) for scoring, pitting, or excessive wear. Damaged metal components MUST be replaced prior to seal installation.
Lubricated Assembly: Soak all new elastomeric seals in clean hydraulic fluid. Lightly lubricate all seal grooves and sliding surfaces before installing new seals.
Proper Tool Use: Use seal installation tools (cone tools, picks, sleeves) to carefully install seals without cutting, stretching, or rolling them over sharp edges.
Torque to Specification: During reassembly, use a calibrated torque wrench. Adhere strictly to Komatsu's specified torque values and sequences for gland bolts or end caps.
Critical Specific Warnings
APPLICATION VERIFICATION IS CRITICAL: Part number 707-98-34590 is used for tilt cylinders on specific dozer models. You must verify the exact machine model this kit is designed for using official Komatsu documentation. Using it on an incompatible model or cylinder type will cause failure.
METAL SURFACE CONDITION: This kit seals fluid between precision metal surfaces. It CANNOT repair a scored rod or a worn cylinder bore. Installation on damaged components will result in immediate, severe leakage.
EXTREME ABRASIVE ENVIRONMENT: Dozer tilt cylinders are constantly exposed to dirt. Absolute cleanliness during assembly is non-negotiable to prevent rapid abrasive seal wear upon startup.
BLADE SUPPORT HAZARD: The bulldozer blade must be fully lowered and supported by the ground. Never work on a cylinder that is under load or hydraulic pressure.
Specific Components Included
Complete seal set matching OEM configuration
All dynamic and static seals as specified
Wear components per original design
Necessary backup rings and support components
Note: Kit contents are configured to exactly match the component list and arrangement of the original Komatsu 707-98-41020 kit. Includes detailed installation diagram.
Frequently Asked Questions
A. When will get the items after I place order?
Q. Once your payment is confirmed,we will arrange the goods within 1~4 days; if not in stock, we will inform you before placing the order?
A. If I only know the excavator model, but can not offer parts No.,what should I do ?
Q. If possible, you can send us pictures of old products, nameplate or the size for reference.
A. How can you guarantee the quality??
Q. We will 100% test the goods before delivery. We also support video inspection.
A. How long will it take to delivery to my address??
Q. The normal delivery time is 3-7 days, depending on which country you are in.?
A : Which delivery method will you choose?
Q : By sea, air or express(DHL,Fedex,TNT, UPS, EMS etc.)，Sometimes we will arrange as the customer's demand.
A: What's package? Can you give me the package according my requirement??
Q. We usually packed by standard exported box or carton. And yes we can pack as per your requirement.
A: Can the price be cheaper?
Q: Of course, you will be offered a good discount for a big amount.
A: Why should I choose to buy from you?
Q:Our advantages: 100% quality assurance, develop and manufature follow original ones;Quick response within 24 hours; Small order allowed;Reasonable stock and timely delivery;Neutral packing, customized packing are allowed. Positive customer feedback from abroad market;Excellent after-sales service.
A : Which payment terms can you accept?
Q : Paypal. Western Union, Bank Transfer, T/T...
Contact COGENG
📞 Phone: +86-185-2913-1515 🌐 Instagram
📧 Email: hugo@cogeng.net 🌐 Facebook：Excavator Parts Selection and Replacement Community
💬 WhatsApp +86-185-2913-1515 Facebook: Excavator Wiring Harness
💬 WeChat: +86-185-7865-1106 Facebook: Excavator Wire Harness
🌐 Website: cogeng.net
#ExcavatorWiringHarness #ExcavatorThrottleMotor #ExcavatorSolenoidValve #ExcavatorSealKit
