| Specification Category | Detailed Specification |
|---|---|
| COGENG Part Number | CG-KOM-6217818731 |
| OEM Reference Number | 6217-81-8731 |
| Compatible Equipment | Komatsu PC800-7 Excavator |
| Engine Compatibility | SAA6D140E-3G-8, SA6D140E-3H-7 |
| Wire Insulation Material | High-Temperature Oil-Resistant XLPE |
| Connector Protection Rating | IP67 Rated (Submersible up to 1m, 30 minutes) |
| Operating Temperature Range | -45°C to 165°C |
| System Voltage Rating | 24V DC System |
| Wire Gauge Compliance | Meets Komatsu Original Specifications |
| Quality Verification | 100% Circuit & Sensor Continuity Tested |
| NO | Number | Name | Qty |
| 1 | 6217-81-8731 | WIRING HARNESS | 1 |
| 2 | 04434-52110 | CLIP | 3 |
| 3 | 04434-51810 | CLIP | 2 |
| 4 | 144-874-7470 | BOSS | 4 |
| 5 | 01435-01035 | BOLT | 2 |
| 6 | 01435-01040 | BOLT | 2 |
| 7 | 6691-41-8230 | SPACER 10MM | 6 |
| 8 | 01435-00825 | BOLT | 6 |
| 9 | 04434-51810 | CLIP | 2 |
| 10 | 04434-51710 | CLIP | 1 |
| 11 | 04434-51510 | CLIP | 1 |
| 12 | 04434-51310 | CLIP | 1 |
| 13 | 04434-51010 | CLIP | 2 |
| 14 | 6217-81-8250 | PLATE | 1 |
| 15 | 01435-01020 | BOLT | 2 |
| 16 | 6217-81-8160 | BRACKET | 1 |
| 17 | 01435-01014 | BOLT | 2 |
| 18 | 6217-81-8261 | COVER | 1 |
| 19 | 01435-01020 | BOLT | 3 |
| 20 | 01643-31032 | WASHER | 3 |
Complete machine power shutdown required before installation
Follow exact OEM routing around engine components and through protective conduits
Secure all mounting points and protective covers according to factory specifications
Verify all sensor, injector, and actuator connectors are fully engaged and locked
Perform comprehensive engine system diagnostic after installation
