| Specification Category | Detailed Specification |
|---|---|
| COGENG Part Number | CG-KOM-2070671170 |
| OEM Reference Number | 207-06-71170 |
| Compatible Models | Komatsu PC360-7, PC1250-7, PC450LC-7 |
| Machine Weight Range | 36-125 Ton Large Excavators |
| Wire Insulation Material | Oil-Resistant Cross-Linked Polyethylene (XLPE) |
| Connector Protection Rating | IP67 (Dust Tight & Submersible up to 1m) |
| Operating Temperature Range | -45°C to 135°C |
| System Voltage Rating | 24V DC System |
| Application Environment | Mining, Heavy Construction, Large-Scale Excavation |
| Quality Verification | 100% Circuit Continuity & Insulation Tested |
| Warranty Protection | 18-Month Limited Warranty |
| NO | Number | Name | Qty |
| 1 | 22U-43-23111 | PLATE | 1 |
| 2 | 207-06-71170 | WIRING HARNESS | 1 |
| 3 | 22U-43-23120 | BRACKET | 1 |
| 4 | 22U-43-23130 | STAY | 1 |
| 5 | 207-06-71180 | COVER | 1 |
| 6 | 208-43-71690 | COVER | 1 |
| 7 | 22U-06-22420 | POTENIOMETER ASS'Y | 1 |
| 8 | 22U-06-22470 | KNOB | 1 |
| 9 | 08086-20000 | SWITCH | 1 |
| 10 | 22U-06-22480 | PLATE | 1 |
| 11 | 22U-06-22190 | SWITCH | 1 |
| 12 | 22U-06-22290 | SWITCH | 1 |
| 13 | 22U-06-22390 | SWITCH | 1 |
| 14 | 22Y-06-23770 | CLIP | 2 |
| 15 | 22Y-06-23920 | CLAMP | 1 |
| 16 | 08034-10414 | BAND | 2 |
| 17 | 01023-60408 | SCREW | 1 |
| 18 | 01023-60512 | SCREW | 6 |
| 19 | 01023-10508 | SCREW | 5 |
| 20 | 01023-10512 | SCREW | 6 |
| 21 | 01601-20513 | WASHER | 5 |
| 22 | 01023-60630 | SCREW | 2 |
| 23 | 01640-20610 | WASHER | 2 |
| 24 | 208-43-71610 | CUSHION | 2 |
| 25 | 208-43-71620 | PIPE | 2 |
| 26 | 01023-70514 | SCREW | 2 |
| 27 | 22U-43-23210 | COVER | 1 |
| 20U-06-22370 | SWITCH ASS'Y | 1 | |
| 28 | 20U-06-22340 | • WIRING HARNESS | 1 |
| 29 | • PLATE | 1 | |
| 30 | 208-43-71420 | • CAP | 2 |
| 31 | 22U-43-23230 | COVER | 1 |
| 32 | 208-43-71670 | FRAME | 1 |
| 33 | 22U-43-23250 | SHEET | 1 |
| 34 | 08059-00310 | CLIP | 2 |
| 35 | 01023-60616 | SCREW | 4 |
| 36 | 569-06-61960 | RELAY | 3 |
| 37 | 01435-00612 | BOLT | 3 |
| 38 | 01023-60410 | SCREW | 2 |
| 39 | 22U-43-23711 | COVER | 1 |
| 40 | 01023-10614 | SCREW | 2 |
| 41 | 01643-30623 | WASHER | 2 |
| 42 | 01010-81030 | BOLT | 4 |
| 43 | 01643-31032 | WASHER | 4 |
Complete machine power shutdown and isolation required before installation
Follow model-specific OEM routing diagrams for proper harness placement
Secure all mounting points with original hardware and protective conduits
Ensure all high-current connectors are fully engaged and locking mechanisms secured
Verify proper clearance from hydraulic components, heat sources, and moving parts
Perform comprehensive system diagnostic and functional testing after installation
