If you work with heavy equipment – excavators, wheel loaders, forestry machines, or hydraulic systems – you've likely encountered pressure sensors from Volvo, Danfoss, or the MBS 1250 series. These sensors are critical for monitoring hydraulic pressure, oil pressure, brake pressure, and more.
However, the part numbers and certifications can be confusing. Today we're clearing up the confusion around three specific identifiers:
VOE16213230 – a Volvo part number
E311982 – a UL certification number associated with Danfoss
MBS 1250 – a sensor series from Danfoss
The key insight: VOE16213230 and E311982 essentially refer to the same physical pressure sensor, with the difference being the part number system – one from Volvo, the other from Danfoss. Both fall under the broader MBS 1250 family, but there are design variations (square vs cylindrical) within that family.
In this comprehensive article, we'll cover:
What each part number/certification means
The relationship between VOE16213230, E311982, and MBS 1250
Square vs cylindrical design – which one do you need?
Certification and safety standards
Applications and compatibility
Buying considerations and logistics
A pressure sensor (or pressure transmitter) converts hydraulic or pneumatic pressure into an electrical signal that the machine's ECU (Electronic Control Unit) can read. These signals are used for:
Hydraulic system monitoring – ensuring proper pressure for boom, arm, bucket, and swing functions
Brake pressure monitoring – critical for safety on wheel loaders and trucks
Oil and fuel pressure monitoring – protecting engines from low-pressure damage
Transmission pressure control – ensuring smooth gear shifts
When a pressure sensor fails, you may experience:
Error codes related to pressure readings
Hydraulic functions becoming slow or erratic
Engine derating or limp mode
Brake system warnings – unsafe for operation
Transmission shifting issues
Replacing a faulty pressure sensor with a high-quality equivalent is essential for safety, performance, and uptime.
VOE16213230 is a Volvo construction equipment part number. It is used in:
Volvo excavators (e.g., EC series)
Volvo wheel loaders (e.g., L series)
Volvo articulated haulers
This part number refers to a specific pressure sensor used in Volvo hydraulic and brake systems. It is a direct OEM replacement for machines that originally used this number.
E311982 is NOT a product model number – it is a UL (Underwriters Laboratories) electrical safety certification number. This certification is held by Danfoss and applies to certain pressure sensors manufactured by Danfoss (or an OEM on their behalf) that meet UL safety standards.
Key points about E311982:
It is a certificate number, not a product series
It indicates the sensor has passed UL electrical safety testing (insulation, dielectric strength, flame resistance)
It is associated with Danfoss as the certificate holder
It has no direct link to the COGENG brand – COGENG manufactures sensors that are functionally and dimensionally identical to the Danfoss-certified sensors
MBS 1250 is a well-known sensor series from Danfoss. These are compact pressure transmitters designed for industrial and mobile hydraulic applications. Key features of the MBS 1250 series:
Rugged stainless steel construction – suitable for harsh environments
High overpressure capability – withstands pressure spikes
Temperature-compensated – accurate readings across a wide temperature range
Multiple pressure ranges – from 0–10 bar up to 0–600 bar
Various output signals – typically 4–20 mA, 0–10 V, or ratiometric
The MBS 1250 series includes different physical designs – and this is where the square vs cylindrical difference comes in.
Within the MBS 1250 family, there are two common physical designs:
Typically features a rectangular or block-shaped housing with a built-in electrical connector (often Deutsch or AMP style)
Commonly used in mobile hydraulic applications on excavators, loaders, and tractors
Often has a higher ingress protection rating (IP67 or IP69K)
The connector is usually integrated into the body – no flying leads
Features a cylindrical or tube-shaped housing – similar to a small cartridge
Often has a cable output (flying leads) or a smaller threaded connector
Commonly used in industrial, pneumatic, or lighter-duty hydraulic applications
May have a smaller footprint for tight spaces
The choice depends on your machine and the original sensor design:
If your original Volvo part number is VOE16213230, you typically need the square/block design with a Deutsch or AMP connector.
If your original Danfoss sensor has a cylindrical body with a cable, you need the cylindrical version.
Always check the physical connector type, mounting thread size, and pressure range.
Important: Both square and cylindrical designs can carry the E311982 UL certification – the certification applies to the electrical design, not the physical housing shape.
Here's the simplified relationship:
| Identifier | Type | Description |
|---|---|---|
| VOE16213230 | Volvo Part Number | The OEM part number used by Volvo for this pressure sensor |
| E311982 | UL Certification Number | The safety certification held by Danfoss for the sensor design |
| MBS 1250 | Danfoss Product Series | The sensor family that includes both square and cylindrical designs |
The bottom line:
VOE16213230 is a specific Volvo part number that refers to a pressure sensor in the MBS 1250 family.
That sensor carries the E311982 UL certification because it is manufactured to Danfoss standards.
COGENG manufactures replacement sensors that are functionally and dimensionally identical to the Volvo/Danfoss products, matching both the VOE16213230 part number and the MBS 1250 specifications, with the same safety and performance characteristics.
In other words: VOE16213230 ≈ E311982-certified MBS 1250 sensor – same product, different naming convention.
COGENG offers a direct replacement for the VOE16213230 pressure sensor. Here's what you can expect:
| Parameter | Specification |
|---|---|
| Pressure range | 0–25 bar, 0–100 bar, 0–250 bar, etc. (match your original) |
| Output signal | 4–20 mA, 0–10 V, or ratiometric (match your ECU) |
| Supply voltage | 9–32 V DC (typically 12V or 24V systems) |
| Accuracy | ≤ ±0.5% FS (full scale) |
| Overpressure capability | Up to 3x rated pressure |
| Burst pressure | ≥ 4x rated pressure |
| Operating temperature | -40°C to +100°C (or higher, depending on version) |
| Protection class | IP67 or IP69K (square version) |
| Electrical connection | Deutsch DT04, AMP, or M12 (square version) / cable (cylindrical) |
| Pressure connection | G1/4, 1/4 NPT, M14x1.5, or custom (match your original) |
| Material | Stainless steel (housing), ceramic or piezoresistive sensing element |
| Certification | Compliant with ISO9001 and equivalent safety standards |
Stainless steel housing – corrosion-resistant for hydraulic fluid and environmental exposure
Ceramic or piezoresistive sensor element – provides long-term stability and high accuracy
High-quality O-rings – leak-proof sealing at high pressures
Gold-plated connector pins – corrosion-resistant for reliable electrical contact
Our sensor is a pin-to-pin, connector-to-connector replacement for the original Volvo part. No modifications, no adapters – just install and go.
The sensor is designed to the same performance and durability standards as the Danfoss MBS 1250 series – so you get the same reliability at a lower price.
While COGENG does not hold the E311982 certificate (that belongs to Danfoss), our sensors are built to the same safety and electrical standards – including dielectric strength, insulation resistance, and flame retardancy.
We offer both designs:
Square/block housing – for Volvo excavators/loaders that use VOE16213230
Cylindrical/tube housing – for applications that use the MBS 1250 cable-output version
We can match your original sensor's exact specifications – just provide your original part number or sensor details.
OEM Volvo and Danfoss sensors can be expensive. COGENG offers the same fit, form, and function at a significant cost saving – typically 30–50% less.
We accept orders as small as 1 piece – perfect for testing and verification.
We ship worldwide via DHL, FedEx, UPS, air freight, or sea freight.
These sensors are widely used across multiple brands and models:
Volvo EC140, EC160, EC180, EC210, EC240, EC290, EC360 excavators
Volvo L60, L70, L90, L110, L120, L150, L180 wheel loaders
Volvo A25, A30, A35, A40 articulated haulers
Volvo paving and compaction equipment
Hydraulic power units
Mobile cranes
Forestry equipment
Agricultural tractors and harvesters
Industrial hydraulic systems
Brake pressure monitoring systems
The Volvo VOE16213230 sensor is typically the square/block design with a Deutsch connector. This is the most common configuration for mobile hydraulic applications on Volvo construction equipment.
The cylindrical MBS 1250 sensors are more often found in:
Industrial applications where a cable output is preferred
Older equipment or retrofit applications
Space-constrained installations
Always verify the physical design of your old sensor before ordering. If your old sensor has a square metal housing with a Deutsch connector, order the square version. If it has a cylindrical tube with a cable, order the cylindrical version.
E311982 is a UL certification number for electrical safety. It covers:
Dielectric withstand voltage – no breakdown at high voltage
Insulation resistance – minimal leakage current
Flame resistance – materials self-extinguish in case of fire
Temperature rise – safe under continuous operation
Does COGENG have E311982? No. The certification is held by Danfoss. COGENG does not claim to hold this certification. However, COGENG sensors are manufactured to the same or higher safety standards and undergo rigorous testing, including:
100% pressure testing
100% electrical testing (continuity, insulation resistance)
100% leak testing
Yes. Our sensors are:
Built to ISO9001:2015 quality standards
Tested for overpressure and burst pressure
Built with flame-retardant and oil-resistant materials
Designed to match OEM electrical and mechanical specifications
In practical terms, the COGENG sensor is as safe and reliable as the original Danfoss/Volvo sensor.
Caution: Installation should be performed by a qualified technician. The following is general guidance.
Relieve hydraulic pressure – turn off the engine and operate controls to release stored pressure.
Clean the area – prevent dirt from entering the hydraulic port.
Remove the old sensor – use the correct wrench size on the hex flats.
Inspect the port – check for damaged threads or contamination.
Apply thread sealant or O-ring – if applicable (do not use Teflon tape on O-ring seals).
Install the new sensor – torque to specification (typically 30–40 Nm for 1/4 BSPP, refer to manual).
Connect the electrical connector – ensure it clicks and locks.
Start the engine – check for leaks and verify pressure readings on the display.
Clear any error codes – test machine functions.
Essentially yes – they refer to the same physical pressure sensor. VOE16213230 is the Volvo part number, while E311982 is the UL certification number held by Danfoss for that sensor design.
Yes – the sensor belongs to the MBS 1250 family. However, MBS 1250 includes multiple variants (square and cylindrical), so you need to match the physical design.
The square/block design has a built-in Deutsch or AMP connector and is typically used in mobile hydraulic applications. The cylindrical design has a cable output and is more common in industrial applications.
Yes – COGENG offers a direct replacement for VOE16213230 that matches the original Volvo/Danfoss specifications, available in both square and cylindrical designs.
COGENG does not hold the E311982 certificate – it belongs to Danfoss. However, COGENG sensors are built to the same safety standards and are ISO9001 certified.
Yes – it is a direct pin-to-pin, connector-to-connector replacement. No modifications are needed.
Check your original sensor – the pressure range is usually printed on the label or housing. Common ranges include 0–25 bar, 0–100 bar, 0–250 bar, and 0–400 bar.
Most Volvo sensors in this category use a 4–20 mA or 0–10 V output. Check your original sensor or your machine's service manual.
Yes – trial orders of 1 piece are accepted.
Via DHL/FedEx/UPS: 3–7 business days. Via air freight: 7–10 days. Via sea freight: 20–40 days.
Understanding the relationship between VOE16213230, E311982, and MBS 1250 is key to ordering the correct pressure sensor for your Volvo or Danfoss application.
| Product | What It Is | Who Uses It |
|---|---|---|
| VOE16213230 | Volvo part number | Volvo excavators, loaders, haulers |
| E311982 | UL certification number (Danfoss) | Safety certification – not a product number |
| MBS 1250 (Square) | Block/rectangular housing with connector | Mobile hydraulic applications (Volvo, etc.) |
| MBS 1250 (Cylindrical) | Round/tube housing with cable | Industrial and light hydraulic applications |
The COGENG replacement offers:
✅ Direct fit for VOE16213230
✅ Same MBS 1250 specifications
✅ Square or cylindrical design – choose your type
✅ ISO9001 certified quality
✅ Safe and reliable
✅ Cost-effective – save 30–50% vs OEM
✅ Trial orders accepted
✅ Worldwide shipping
Don't let a faulty pressure sensor slow down your operation. Order the right sensor today and get back to work with confidence.
Call to Action:
🔧 Ready to order your VOE16213230 / MBS 1250 pressure sensor? Contact COGENG today for a quick quote.
✅ Mention part number VOE16213230 or sensor type MBS 1250 for priority service.
✈️ Worldwide shipping via DHL, FedEx, UPS, or sea freight – we deliver to your door.
This SEO-optimized blog post is designed to help Volvo owners, fleet managers, mechanics, and parts buyers understand the relationship between VOE16213230, E311982, and MBS 1250 pressure sensors, and to choose the correct replacement. Bookmark this page or share it with your service team.
Contact COGENG
📞 Phone: +86-185-2913-1515 🌐 Instagram
📧 Email: hugo@cogeng.net 🌐 Facebook：Excavator Parts Selection and Replacement Community
💬 WhatsApp +86-185-2913-1515 Facebook: Excavator Wiring Harness
💬 WeChat: +86-185-7865-1106 Facebook: Excavator Wire Harness
🌐 Website: cogeng.net 🌐 YouTube: COGENG_2023
